LCD soo bandhig garaaf 128×64

LCD garaaf 128 x 64 (dhibcood)

● STN-YG / STN-Blue / STN-Gray /FSTN-Gray

● +3.3V/+5.0V koronto

● Tilmaamaha Daawashada: 6H / 12H

● Iftiinka dambe (Laydhka dhinaca): Jaalle-cagaaran / Cagaaran / Cadaan / buluug / Orange / Casaan / Amber / RGB

Sharaxaada Alaabta

Module lambar:	HSM12864F
Nooca Muujinta:	128 x 64 dhibcood
Soo koobid:	COB
Cabbirka dulucda:	78 x 70 x 12.3 mm
Aagga Daawashada:	62 x 44 mm
Midabka Shaashada:	Jaalle-Cagaar/Buluug/Cawlan
Midabka dambe ee iftiinka:	Jaalle-cagaar/cagaaran/caddaan/buluug/liimi/casaan
Iftiin danbe::	Dhinaca LED
Darawalka IC:	RA6963
Xiriiriyaha:	Rubber Silikoon Wax-qabad
Lambarka biinanka:	20
Interface:	8 BIT baska MPU interface
Xaaladda Darawalka:	1/64 Waajib,1/9 Eexda
Jihada Daawashada:	6 saac
Ku shaqaynta Voltage:	5V/3.3V
Heerkulka shaqada:	-20～+70℃
Heerkulka Kaydinta:	-30 ～+80 ℃

Pin No.	Astaanta	Shaqada
1	FG	Qaabka (Bezel)
2	VSS	Dhulka (0V)
3	VDD	Soo gelinta korontada ee darawalka IC (+5V)
4	VO	Qalabka sahayda darawalka LCD, Isbeddel isbarbardhigga
5	/WR	Xog qor, ku qor xogta T6963C marka WR=L
6	/RD	Akhri xogta, akhri xogta T6963C marka RD=L
7	/CE	L: Awood u yeelashada Chip
8	C/D	WR=L,C/D=H: Command Write C/D=L:Data qor RD=L,C/D=H: Xaalada Akhri C/D=L: Xogta la akhriyay
9	RST	H: Caadi L: Bilow
10–17	DB0 ~ DB7	Khadka baska xogta
18	FS	Biinanka xulashada farta, H=6X8, L=8X8
19	LED+	Iftiinka dambe + (5V)
20	LED-	Iftiinka dambe- (0V)

Iibka tooska ah ee warshadda LCD soo bandhig midab iyo cabbir kala duwan.

Waxaan sidoo kale naqshadeyn karnaa oo soo saari karnaa guddiga LCD ee TN, HTN, STN, FSTN, DFSTN, VA(BTN) iyo COG, TFT iyo OLED.

Moodooyinka la habeeyey waa la soo dhaweynayaa, sidee lagu heli karaa qaabka la habeeyey?

Talaabada 1: Soo dir sawirkaagii asalka ahaa ama muunada ama sawirada, haddi aanad hayn macluumaadkan, noo sheeg waxa lagaaga baahan yahay.

Tallaabada 2: Sida ku cad faahfaahintaada, waxaan ku siineynaa qiimaha qiyaasta, ka dibna kuu soo dir sawirka qabyada ah.

Tallaabada 3: Ka dib markaad xaqiijiso sawirkayaga, waxaana ku siineynaa qiimo sax ah.

Tallaabada 4: Muunad ayaa la samayn doonaa ka dib markaad diyaariso kharashka qalabaynta, muunado ayaa diyaar ah ilaa 20 maalmood.

Tallaabada 5: Ka dib markii muunado la xaqiijiyo, wax soo saarka ballaaran waa la aqbalayaa.

1.Tayada sare.Nidaamka maaraynta tayada qumman, tayada xasilloon ee alaabta ceeriin, heerka tayada badeecada 98% ama ka badan
2.On-time bixinta.Hubi in dalabaadka lagu keeno wakhtiga iyo tirada
3.Full agabka silsiladda sahayda.Baahida sare ee alaabta ceeriin, hubinta tayada alaab-qeybiyeyaasha, nidaamka maaraynta saxda ah, hubinta baahida sahayda alaabta ceeriin;
4.Sida joogtada ah ee qiimaha wax soo saarka.Heerka sare ee otomaatiga ah ee khadka wax soo saarka, si buuxda u wanaajinaya waxtarka shaqada qof kasta, tayada badeecada deggan, oo si weyn u dhimaysa wax soo saarka ganacsiga iyo kharashyada wax soo saarka;si loo gaaro guul-guul iyo raaxaysi qiimo leh oo macaamiisha iyo shaqaalaha ah.